C4 Upgrade Air Management to Improved Fuel Delivery - Got Air?

Samuel James Mar 2, 2010 0 Comment(s)

::: THINGS YOU'LL NEED

PARTS LIST
From Mid-America Motorworks catalog:

>> Accel high-flow intake manifold,PN 618-589
>> Accel high-flow intake runners,PN618-587
>> Accel high-flow plenum, PN 618-583
>> Edelbrock throttle body, PN 609-093
>> Adjustable MAF sensor, PN 622-622
>> EGR Tube Insulation
From local speed shop:
>> Mr. Gasket manifold/runner gasket setPN 5851
From local Chevy dealer:
>> IAC connector
>> TPS connector

TOOLS OF THE TRADE
In addition to everyday handtools suchas screwdrivers, wrenches, and sockets,you'll also need:

>> 5⁄8-inch line (flare) wrench
>> 3⁄4-inch line (flare) wrench
>> 8mm socket
>> 10mm socket
>> T20 torx socket
>> T40 torx socket
>> T45 torx socket
>> 3⁄8-inch16 tap (for chasing cylinder headbolt holes)
You may also want to use:
>> Snap-on ball-type hex and torx driver set
>> Snap-on wire connector pigtail remover
>> Teflon tape (for pipe fittings)
>> Silicone sealant (for front and rear ofintake manifold)
>> Thread sealant

MORE PHOTOS

VIEW FULL GALLERY

COMMENTS

TO TOP