How To Repair Your Weatherstripping - Airtight

Make Your '84-'96 Door Weatherstripping New Again

Cam Benty Mar 1, 2004 0 Comment(s)
Corp_0403_01_z Weatherstripping_repair Weatherstripping 1/15

Our weatherstripping had seen better days.

Weatherstripping takes a beating. Exposed to the elements and smog, that supple piece of weatherstripping that seals out rain, cold, and keeps your Corvette cabin warm and cozy just doesn't get enough credit. When it fails, you certainly hear and feel the consequences.

Our '86 Corvette project car was in terrible shape. The outer-seal rubber was completely dead, missing whole sections that had fallen inside the door itself. The inner door panel was destroyed at the point of the inner weatherstrip seal, and the entire rubber seal around the door looked as though huge rubber-munching mice had taken hold and were tunneling through the door. Time for help.

Corp_0403_02_z Weatherstripping_repair New_door_panels 2/15

We are also due for some new door panels from Al Knoch. The upper portion of this panel is completely destroyed.

The folks at Mid America came to the rescue with a complete kit for our doors, including inner and outer window-seal strips that were a snap to install, as well as new door panels and a door weatherstrip kit from Al Knoch.

For the most part, the installation was easy; but the large number of brittle plastic pieces we encountered when disassembling and reinstalling the door panels proved to be difficult. The sun-baked components had a tendency to break before coming apart; so, if you haven't tackled this job, get ready-the parts are clearly a challenge. We advise purchasing a manual that shows the placement of the pieces.

Follow along as we work to make our Corvette airtight.

Sources

Eddie Paul Industries inc.
El Segundo, CA
www.epindustries.com
« Prev 1 2 Next »

MORE PHOTOS

VIEW FULL GALLERY

COMMENTS

subscribe to the magazine

get digital get print
TO TOP