Detroit Speed Subframe Connector Kit Install - Project Gets Integrated Rails

We Stiffen Up The Sloppy Steel With DSE Subframe Connectors

Christopher Campbell Feb 1, 2010 0 Comment(s)

A lot of good things can be said about the evolution from the first to second generation Camaro. For example, the '70-81 cars had vastly improved suspension geometry, larger factory wheelwells, and a more aerodynamic fuselage style body. But one thing definitely not on the list is excellent structural rigidity.

1002chp_01_z Detroit_speed_subframe_connector_kit_install Suspension_upgrades 1/19

Unlike most unibody designs where the front subframe rails are welded flush to the floorpans in several locations, second-gen Camaro subframes are attached at only four bolt points with body mounts that have a surface area of only a few inches. While there are real advantages to that design, including easy removal and replacement, it also means all the twisting and bending force of suspension travel and uneven road surface is transferred to a small area of thin steel rather than being spread out over a large surface area.

In stock form, soft springs and rubber body bushings squelch a lot of that abuse, but when upgrades like stiff springs, aggressively valved shocks, and solid body bushings are added in pursuit of lateral performance, all that force has to go somewhere. With the stock subframe in place some of the force would dissipate by distorting the weak rails, but with the increased torsional rigidity of our DSE hydroformed front subframe bolted in place with solid aluminum body mounts, most of the force would go into Project F73's sheetmetal. If you had a camera mounted underhood, the flex would be clearly visible.

While metal fatigue is a real concern, especially from frequent hard driving or track days, the most immediate concern is that deformation and flex will rob our ride quality and cornering potential by altering the geometry of the front suspension and the contact patch of the tire. Not a big deal in a regular street-driven Camaro, we suppose, but who wants to think they're not getting their money's worth out of their new suspension?

1002chp_03_z Detroit_speed_subframe_connector_kit_install New_parts 2/19

What's the solution? It's as simple as a good pair of subframe connectors. The problem is, we need more than a standard set of connectors that hang under the floorpans and bolt or weld to the front and rear subframes. While those do help somewhat, there's only one way to install true subframe connectors-and it involves lots of cutting.

Like other subframe connector designs out there, DSE's design increases the car's stiffness by connecting the front subframe to the rear framerails. Unlike others, DSE's subframe connectors are flush with the subframe assembly, without curves in their shape because the large rectangular steel tubes are integrated into the floorpans. By installing the connectors in this manner they become part of the car, greatly increasing their effectiveness.

It was a solid day's worth of work to prep Project F73, then another to install the rails, but it's time well spent to ensure we're not compromising all of our other efforts to increase lateral grip.

Quick Notes
What We Did
Installed Detroit Speed and Engineering's subframe kit for '70-81 Camaros and Firebirds.
Bottom line
We greatly reduced the bend and flex in F73's chassis.
Cost
$185 for the kit and it includes an instructional DVD.

MORE PHOTOS

VIEW FULL GALLERY

COMMENTS

subscribe to the magazine

get digital get print
TO TOP