Decemeber 2012 Chevy High Performance Parts

View Full Gallery

Bolt-on Ease

1212chp 01 O  December 2012 Chevy High Performance Parts 2/8

Intake manifoldinstallation kits for small-blocks

These manifold installation kits contain all the necessary components needed to replace a stock iron intake manifold with an Edelbrock aluminum manifold. These kits enable customers to get greater performance and efficiency out of their engine without the hassle of taking countless trips to the parts store to source all the components needed for the installation. There are three available options: Edelbrock Performer EPS, Performer RPM, or Performer RPM Air-Gap intake manifold kits. Each kit includes an intake manifold, intake gasket set, intake bolt kit, carburetor base gasket, RTV sealant, and a carb stud kit.

Edelbrock, LLC

310.781.2222 · edelbrock.com

Horsepower in a Box

1212chp 02 O  December 2012 Chevy High Performance Parts 3/8

GM 572 Power at 502 Prices

This new 502ci big-block produces 600-plus horsepower and 550 lb-ft of torque for a few thousand dollars less than the GM 572 crate engine that is rated at 620 hp. This powerplant is assembled using a brand-new Chevrolet Performance 502ci short-block and is topped off with a pair of Edelbrock cylinder heads. Each engine is professionally dyno tuned and tested, features a pump-gas happy 9.6:1 compression ratio, and is well suited for street and/or strip.

Pace Performance

888.748.4655 · paceperformance.com

Rolling in Style

1212chp 03 O  December 2012 Chevy High Performance Parts 4/8

New black hard coat anodizes center

Built for speed, the Street Lite is engineered to be the ultimate street and strip wheel, and is now available with a Black Hard Coat Anodized center for additional style. Just like its polished brother, the Black Street Lite is SFI 15.1 certified and accepts 5/8-inch wheel studs or mag shank lug nuts and offers lightweight performance with style.

Billet Specialties Inc.

800.245.5382 · billetspecialties.com

Built to Last

1212chp 04 O  December 2012 Chevy High Performance Parts Hub 5/8

C5/6 Corvette “Front” Hub Kit

The GMR is proud to introduce the industry’s first serviceable, billet aluminum C5/C6 Front Hub. This hub was specifically designed for the classic car that sports the infamous C5/C6 suspension. These new C5/C6 hubs are lighter, stronger, and faster than the OE hub units that have quickly become known as “consumables” in the high-performance world. This all-new offering by The GMR is compatible with most popular brake manufacturers, can be installed on any C5/C6 upright/steering knuckle, and is designed specifically for the hard-core Pro Touring enthusiast, who demands the best.

The GMR

866.570.5962 · thegmr.com

Instant Power

1212chp 05 O  December 2012 Chevy High Performance Parts 6/8

LS Perimeter Plate Nitrous system for ’12 Camaro

The complete, race-ready ZEX LS Series Perimeter Plate Nitrous System for the ’12 Chevy Camaro uses three cutting-edge technologies to provide optimum spray efficiency and fuel distribution in the newest Camaro model. These new kits use Perimeter Injection Technology, utilizing 12 injection points to create a 360-degree, perfectly atomized blend of fuel and nitrous that generates maximum power without sacrificing engine safety. Cryo-Sync Technology routes the nitrous through a set of internal passages before spraying in the engine to allow the nitrous to drop to -127 degrees F, which cools the throttle body and intake manifold. Airflow Enhancement Technology injects nitrous at an optimized angle, toward the center of the intake plenum, to create a pocket of intense low pressure below the throttle body while the nitrous is sprayed. The low-pressure area enhances airflow into your engine to improve power. These three advanced technologies maximize boost potential while maintaining the safety of your Camaro’s engine. Adjustable from 100-250 hp, the system provides optimum spray efficiency and fuel distribution.

ZEX

888.817.1008 · zex.com

Pump you up

1212chp 06 O  December 2012 Chevy High Performance Parts F 7/8

Classic F-body “Stealth” tanks

Aeromotive is proud to release its new, stealth-style reproduction fuel tanks for the classic ’67-69 Camaro. These new tanks feature a preinstalled, in-tank 340 Stealth Fuel Pump and complete in-tank performance baffling. This revolutionary new product makes classic Camaro EFI conversions and late-model EFI engine swaps a snap. The built-in 340 Stealth Fuel Pump can support up to 700-plus horsepower EFI and up to 1,000hp carbureted, when used with the proper Aeromotive bypass regulator. This easy-to-install setup takes a huge bite out of the cost and complexity necessary to bring your muscle car up to date. Just strap the fuel tank up as a direct replacement for the original tank, hook up your wires, a fuel supply and return line, and you’re done. Forget welding, hacking, crazy expensive custom tanks, and all that extra plumbing. With the purchase of one part number you get a powdercoated, stock-appearing steel fuel tank, complete with universal 0- to 90-ohm fuel level sending unit, 340-lph (at 40 psi) Stealth Fuel Pump, pre-pump filter and billet aluminum, black anodized hanger assembly. All this comes preassembled, flow and pressure tested from Aeromotive with a full one-year warranty.

Aeromotive Inc.

913.647.7300 · aeromotiveinc.com/f-body

Simplified

1212chp 07 O  December 2012 Chevy High Performance Parts Motor 8/8

Speedway Motors ’55-57 Chevy Bolt-In Motor Mounts

Simplify the engine swap in your Tri-Five with these new ’55-57 Bolt-In Motor Mounts from Speedway Motors. Speedway Motors engineered its rugged new ’55-57 Chevy Bolt-In Motor Mounts to allow you to easily install a ’58-and-newer small-block Chevy V-8. The engine brackets simply bolt to existing engine mount bosses on the sides of your engine block, while the frame brackets bolt to the original front crossmember on your ’55-57 Chevy frame. Heavy-duty rubber cushions between the engine and frame brackets reduce the transfer of engine vibrations. Each motor mount kit also comes complete with frame and engine brackets, rubber mount cushions, hardware, and installation instructions.

Speedway Motors

800.979.0122 · speedwaymotors.com

« Prev 1 2 Next »

MORE PHOTOS

VIEW FULL GALLERY

COMMENTS

TO TOP