Halo Super Cars’ reverse tilt hood kit is the first of its kind and is now available directly from the manufacturer. This bolt-on kit uses all factory mounti ng locations, eight self-tapping screws, and comes with everything you need for installation in your garage. Basic hand tools, a few hours time, and some minor trimming of the factory latch cover panel are needed. All brackets are CNC laser cut, bent, welded, and assembled in-house in Benton Harbor, Michigan. As well as the CNC-machined release cable slider blocks that allow you to use your factory hood release lever while opening both latches at the same time. High-quality gas struts keep the hood stable even in high winds. With a retail price of $549 this kit is hands-down one of the most attention-grabbing mods you can do for the money.
Halo Super Cars
Eddie Motorsports offers a complete line of dress-up and performance parts for ’67 to ’11 Camaros. Not to be confused with cheap imported metal parts, all of Eddie’s aluminum parts are True Billet, machined from the highest quality 6061 aluminum in the United States at the Eddie Motorsports facility in Rancho Cucamonga, California. The Eddie Motorsports Camaro product line includes billet hood and trunk hinges, serpentine pulley systems, billet taillights, and much more. Call for a free catalog today.
Now you can give your ’10-11 Camaro a sinister look, with the Sinister Camaro Street Appearance Package from PFYC. Available for both V-8 and V-6 models, this ready-to-assemble kit includes ram-air hood with heat extraction, front air dam, side skirts, and rear fascia; dovetail rear spoiler; and 41/2-inch exhaust tips. Each component of the Sinister Camaro package has been crafted to complement and enhance the design of your Camaro. The ram-air hood and dovetail rear spoiler are constructed of the hand-laid fiberglass or carbon fiber (optional). The front air dam, rear fascia, and side skirts are constructed of OEM-quality, high-pressure urethane and include an aggressive GT-inspired diffuser. All parts are ready for prep and paint and include everything you’ll need to install for an OEM fit.
For a limited time you can buy the entire package (a $2,400 value) for just $1,969.
The Granatelli Motor Sports 1G Gen5 Camaro Suspension Bracing System will dramatically increase handling.
Connect key points of the whole undercarriage: The 1G suspension kit creates a full frame, greatly increasing handling.
More power to the ground: Reduced chassis flexing and twisting releases hidden horsepower.
Proven by GMS: On a 200-foot skid pad, yielded 0.984g clockwise, 1.03g counterclockwise.
100 percent complete: From front to back the 1G kit comes with all the necessary pieces to turn your fifth-gen Camaro into a corner carver.
Unbeatable ride and handling: Specially designed for faster response.
Performance for everyone: Fits V-8 and V-6 models.
Customized to fit your needs: These are the part numbers that create a 1G package and are available separately: 500071 Gen5 Camaro Sub-Frame Connector Kit, 500072 Gen5 Camaro K-Member Support Bracket, 500073 Gen5 Camaro Butterfly Sub-Frame Connector Kit, 500074 Gen5 Camaro Rear Sub-Frame Connector Kit, and 500075 Gen5 Camaro G-Load Brace.
Granatelli Motor Sports
Nickey Chicago, the “Original Super Car Headquarters”, is converting Camaros just like 1967 all over again. Reserve a position for a ’13 fifth-generation Nickey Super Camaro today. Conversions also include the new GM ZL1 Camaro. Three stages are offered, from mild to wild, starting at 500 hp, up to over 1,000 hp.
Superchargers and twin-turbo packages are available. They will custom build a Nickey Super Camaro just for you. Nickey is a leader and innovator regarding the fifth-generation Camaro. Everything from turnkey cars to all the special parts in order to build your own are available through Nickey. Why settle for imitations when you can own an original?