CHP Parts Guide - Parts Rack

Old Meets New
20-Inch Billet Rally Wheel
Fifth-generation Camaros can now have the same look from years past. Wheel Vintiques now offers their latest 20-inch Billet Rally hoops. Wheel diameters come standard in 20 inches with widths ranging from 8 to 9.5 inches. Wheel Vintiques also offers standard or custom offsets to fit all factory or massive Baer brake systems. The wheels also fit rally-style hubcaps and can be optioned as fully polished.

Price: $3,100 & up
Wheel Vintiques, Inc

1101chp_03_o Wheel_vintques Billet_rally_wheel 2/10

Controled Flow
Fuel-Pressure Regulator
To help keep race costs down, Procomp Motorsport now offers an affordable line of fuel pressure regulators for serious racing applications. CNC machined from billet aluminum, the regulators feature a return outlet designed to assist in eliminating fuel pressure drops, come with a built-in fuel pressure gauge port, and finished-anodized in midnight black. Black AN fittings are also included in either a two- or four-port configuration.

Price: $60 & up
Procomp Motorsport

1101chp_06_o Procomp_motorsports Fuel_pressue_regulator 3/10

'62-67 Nova Rear Torque Arm
This complete replacement rear suspension assembly is a bolt-in system that's specifically designed for performance. The rear toraque arm features a dropped stance for a lower center of gravity and greater rear axle control. It features 11/4-inch high-performance bars, adjustable pinion support tubes with rod ends and tabs, axlehousing brackets with torque arm tabs, including the install tool. A driveshaft loop with crossmember allows fitment for 3-inch exhaust tubing.

Price: $1,780
Total Cost Involved

1101chp_05_o Total_cost_involved Nova_rear_torque_arm 4/10

Ultra 40 Insulated Wire Sleeve
At 8.65 mm and with 40 ohms of resistance per foot, Moroso Ultra 40 Race Wires incorporate a highly engineered spiral wound conductor. This maximizes energy transfer and minimizes electro magnetic interference (EMI) and radio frequency (RF) interference noise. The closely woven fiberglass is impregnated with high voltage, leak resistant silicone which adds up to 8,000 volts. Sets are packaged in 25-foot lengths and available in your choice of red or black.

Price: $78

Front Gear
LS1 Accessory Belt System
Designed for the LS engine enthusiasts, March Performance has CNC machined complete accessory drivebelt kits out of 6061-T6 aluminum for strength and a perfect fit. An OEM-style tensioner ensures superior belt tension and includes a canister-style power steering pump. These are offered in either a clear or black powdercoating for maintenance-free operation.

Price: $1,925 & up
March Performance

1101chp_07_o March_performance Ls1_accessory_belt_system 7/10

High Strength
Stainless Castle Nuts
Totally Stainless provides high-strength castle nuts for any number of fastening duties for your project vehicle. Not only will these stainless nuts resist corrosion but they are machined to order so they'll match the exact height you need. Simply state the size (7/16-20, 1/2-20, 9/16-18, 5/8-18 or metric) and specify the height from the bottom of the nut to the bottom of the slots.

Price: $7.50 & up
Totally Stainless

1101chp_09_o Totally_stainless Stainless_castle_nuts 8/10

Under control
Power steering pump bracket
Flaming River's new power steering pump bracket for Stage II-style pumps features an all-new revolutionary black-oxide steel design. This bracket offers adjustability that allows it to be used with either a short- or long-neck water pump and is available for both small- and big-block applications. Flaming River also includes a billet aluminum tension adjuster with mounting hardware.

Price: $74
Flaming River

1101chp_08_o Flaming_river Power_steering_pump_bracket 9/10

New LS Cylinder Heads
Mast Motorsports will now offer up 14 different LS cylinder heads from LS1 and LS2 cathedral port, LS3, and LS7 ports, to raised runner race ports in 3.9, 4.0, 4.07 and 4.1+ bore sizes. Mast also adds a full line of two-piece fully ported CNC race intake manifolds with carbureted or fuel injection options. Mast will also introduce cathedral port LS cylinder heads in small, medium and large bore sizes, inline and splayed valve racing LS heads, and the innovative canted valve Mozez LS cylinder heads that will support over 1,000 hp naturally aspirated!

Price: $1,000 & up
Mast Motorsports

1101chp_10_o Mast_motorsports Ls_cylinder_heads 10/10


Additional Tech
Read about some of the parts we review in this issue's Parts Rack section
Nov 24, 2010


Connect With Us

Get Latest News and Articles. Newsletter Sign Up

subscribe to the magazine

get digital get print