Going Old School
Billet Specialties' new Retro Breathers offer a fresh new look in aftermarket valve cover breathers. Official GM Licensed Chevrolet Script breathers are available in polished or black powdercoat finish; Plain Breathers are available in the polished finish only. Retro Breathers feature a two-piece design for easy maintenance and your choice of breather only or PCV breather. Best of all, they are made in the United States.
Lighter is Better
Lightweight High Travel Springs
These ultra-lightweight, high travel springs are made in the United States and are engineered with an expanded body diameter for unsurpassed performance. You get up to 25 percent weight savings over similar springs on the market. High-tensile spring steel with a sleek silver powdercoat finish is standard; Mustang II springs are chrome plated. All springs are cold wound, heat treated, and shot-peened; ground at both ends; and manufactured to precision tolerances. These are currently available in 4- to 14-inch lengths and available in a wide variety of rates. You also get a lifetime guarantee to remain within 2 percent of the original free height and rate.
NOS Dry Pro Race Fogger kits
NOS Dry Pro Race Fogger kits are designed to be used with stand-alone engine management systems, like the Holley Dominator and HP EFI systems that have programmable dry nitrous capability. This allows for complete control of the fuel, nitrous, and ignition for the most repeatable results possible. These kits come with jetting for 175, 250, 300, and 350hp levels, but can support up to 500 hp per stage.
NOS (A division of Holley)
Added Flow and Performance
Dual Exhaust for Late-Model Pickups
The 40-3049 is a complete dual exhaust system that fits '05-13 Silverado and GMC Sierra pickups. JBA reports that this is a mandrel-bent stainless steel system with JBA's proprietary mufflers for that exclusive JBA sound and increased flow and performance. The system features Dual Rear Exit Chromed Tips as well as all mounting hardware for a true do-it-yourself installation. JBA also offers "Cat4Ward" headers for 50-state legal headers for these same trucks. The JBA Headers are also made of stainless steel and are available either as raw stainless or coated with JBA's bright silver metallic ceramic coatings or exclusive "Titanium" coating for more power and long-lasting corrosion resistance.
PerTronix Performance/JBA Exhaust
Billet Aluminum Tremec Shifter Levers
These are direct bolt-on billet aluminum shifter levers that fit Tremec TKO manual transmissions with the standard two-bolt flange and give you that clean, smooth appearance. The windowed levers complement other products in the Lokar line. These are machine grooved for boot attachment, have a 3/8-16 threading for shifter knobs, and all mounting hardware is included with the product. Levers are available in 6- and 8-inch straight and are also available in 6-, 8- and 10-inch with a single bend. Available in your choice of Midnight Series Black finish or brushed. All shifter levers are manufactured and assembled in the United States.
Each Trans-Dapt Carburetor Adapter is precision designed to provide the smoothest transition possible between the carburetor and intake manifold and comes complete with gaskets and mounting hardware. Applications include the Holley 4-Barrel, Holley 2-Barrel, Quadrajet, Rochester 2-Barrel, Tri-Power, Dominator, and more.
Trans-Dapt Performance Products
The Right Stuff
Fuel Tank for '68-72 Novas
If you're looking for a factory-fitting tank that utilizes the stock mounting straps and hardware, look no further. These tanks are built in the United States, offered with or without EFI, and are also available with a sump. All tanks are built in-house so they can be made to custom fit a variety of applications. They are made of 0.090 5052 skinned aluminum and come fully baffled. Tanks start at $450, or $845 with EFI and sender.
Hot Rod City Garage