6.0 Gen III Engine Block - Stump Puller

Transforming the Gen III 6.0L Into a Big-Inch 402

We've all been guilty of it at one time or another. You know, defending the powerplant of our unruly street machine by righteously declaring it has more than enough grunt to get the job done. Unfortunately for most gearheads, what was good at one point in time will eventually have to make way for further improvements. In this case, the only cure to satiate the thunderous urge for raw power is more power.

With that in mind, we've recently become enamored with the 6.0L Gen III block that powers several of The General's full-size trucks. As a matter of fact, these engines are a mirror image of the LS2, only in a cast-iron version, and seem to be finding their way into various first-gen muscle, including many late-model fourth-gen Camaros.

Now when it comes to acquiring a 6.0L Gen III block, there are several options. For starters, SLP offers everything from a rotating assembly to a complete short-block, or should you want to build it from scratch, you can scour the papers, hit up various salvage yards, or make it easier on yourself by ordering it directly from GM Performance Parts. One important thing to note is that if you're starting from scratch, be aware that you're purchasing a bare block and will require several additional components, including all the sensors, oil plugs, front timing cover, valley pan, oil pump, and pick-up. While this could cause potential concern for locating the parts in a timely manner, we found Turn Key Engine Supply in Oceanside, California, to be a valuable resource and were able to get the extraneous parts in our hands as early as the following day! Honestly, these guys were absolutely amazing, and depending on your needs, they offer every component as an individual item or as a complete package deal. Just give them a call and let them know what you need.

Keep in mind there are many different ways to produce the combination we have here-and while a complete short-block would have been easy enough to do, we wanted a challenge, and more importantly to show just how easy it can be to piece one together. With the help of Dennis Lyttle of Coast High Performance, who assembled our mill, we've put together one potent package with nothing more than off-the-shelf components and something that you can easily replicate. Follow along and see how it was constructed, the amount of power it made, and check out just how ill a 402ci Gen III can be!

4

Sources

Westech Performance Group
Mira Loma, CA
951-685-4767
WestechPerformance.com
SLP Performance Parts
Toms River, NJ 08755
732-349-2109
www.slponline.com
Turn Key Powertrain
Oceanside, CA 92056
760-941-2741
www.turnkeypowertrain.com
Comp Cams
Memphis, TN 38118
800-999-0853
http://www.compcams.com
Chevrolet Performance Parts
Detroit, MI 48232
800-577-6888
www.gmperformanceparts.com
Coast High Performance
Torrance, CA 90505
310-784-1010
www.coasthigh.com
Eagle Specialty Products, Inc.
Southaven, MS 38671
662-796-7373
www.eaglerod.com
Holley Performance Products
Bowling Green, KY 42101
270-781-9741
http://www.holley.com
« Prev 1 2 3 Next »

COMMENTS

subscribe to the magazine

get digital get print
TO TOP