Since we knew the moustache strip was going to be our graphic, the first thing we needed was to lay down a single piece of 3/4-inch tape at the front edge of the hood. This will be the guide for all measurements so care was taken to make sure it was straight. Since we had our size James Stuart measures up 4-1/4 inches and places a small piece of tape. Now he lays a piece of tape along the 3/4 tape laid earlier. The 3/4 tape could be removed at this point, but we left it for now. James made sure the blue tape was as straight as possible by setting the passenger's side edge, then pulling it to the center and sticking it. This lets the tape naturally fall straight. He completed this line by pulling it to the driver's side and sticking it.