Subscribe to the Free

Classic Update Series Wiring Kit - American Autowire

Mar 1, 2001
Sucp_0103_01_z Classic_update_series_wiring_kits Top_view 2/2
Sucp_0103_01_s Classic_update_series_wiring_kits Top_view 3/2

It is an undisputed fact that the popularity of the '55-57 Shoebox will never die. Even within our publication there have been many articles on just about every aspect of restoration and modification of these vehicles. While there are countless engine, drivetrain, and suspension options available, there has not been much attention paid to the update of the entire electrical system. Unfortunately, all the performance mods in the world won't make any difference when the tired old wiring in your car can't handle the power requirements of all the electrical accessories so popular on these vehicles.

Original replacement wiring harnesses for '55-57 Chevys have been available for many years. While they are excellent products that are true to original engineering specifications, they leave something to be desired in circuit protection and expandability to custom accessories and performance products requiring connection to the fuse panel. Original wiring harness specifications in the '55-57 vehicles were really very basic. There were no electrical options to speak of and those that were available from the factory, such as power windows and power seats, appeared on very few production cars. Take a look at an original fuse panel in any '55-57 vehicle and you will begin to see the problem. The panel is small with minimum fuse protection. In many cases, age has been unkind to the panel and the original glass fuse clips are rusted to the point that continuity is lacking. Add to this the fact that there is no room for expansion. Besides, even if there was room, the major power feed wires to the fuse panel are too small in gauge to handle the additional power requirements demanded by modified vehicles. The bottom line is that the electrical system design needs a major overhaul.

We contacted American Autowire/Factory-Fit when we heard about their new Classic Update Series wiring kits designed specifically for '55-57 cars. We were familiar with their Factory-Fit product line of reproduction wiring harnesses and wanted to see what this new kit had in store for us.

After close examination, we realized that this was not a generic rewire kit. It is a well thought out kit that includes everything you need to rewire your entire car. Important pieces such as taillight connectors and parking light sockets are included along with their respective weather tight tube and grommet assemblies. However, the best thing about this kit is that knowledge gained in years of producing replacement harnesses is reflected in the design of these kits. The mounting of the fuse box and routing of the wire under the dash has been thought out to be a bolt in exercise that uses existing production routing wherever possible. On the other hand, under hood wiring is completely flexible to allow custom wiring routing (hiding) for a clean look.

All this is great stuff. But what about the kit's ability to handle all the cool stuff we like in a modified car. We tested this by laying out requirements for installing the kit in a '57 car to be equipped with A/C, a Dakota Digital dash cluster, and RAINGEAR(r) under dash wiper system. Added to this was our desire for future addition of power windows, power seats, cruise control, and an electric fuel pump. We did not think this wish list was too much to ask. Filling this bill turned out to be an easy task as provisions for all these requirements are designed into the kit.

The first step in installation was to become familiar with the installation instructions. The "cook book" approach covers installation of the kit in four major groups: under dash, rear body, instrument cluster, and front light and engine wiring. Full schematics are included for the entire car as well as specific installation instructions for each of the four major groups. We removed the seats as this will save considerable time in wiring the body. Other than putting our bodies in those uncomfortable under dash positions, the installation went exactly as shown in the instructions. We now have a high-power electrical system that incorporates modern safety features and expandable power capability for the future.


Dakota Digital
Sioux Falls, SD 57107
American Autowire/Factory Fit
Bellmawr, NJ
Pacific Western Design, Inc.
Seattle, WA 98116

Connect With Us

Get Latest News and Articles. Newsletter Sign Up

sponsored links

subscribe to the magazine

get digital get print