ZL-1 Nothing gets your Chevy nerves tingling like the mention of this legendary piece of big-block history.
For those who need a reminder, the ZL-1 was an aluminum version (heads and block) of the Chevy Mark IV big-block. Designed for racing, it appeared on the scene in 1969, displacing 427 ci and making more than 500 hp. An instant powerhouse in drag racing and, later, in Can Am road racing, the ZL-1 also found its way into a handful of '69 production cars-the rarest of the famed COPO Camaros. These cars were sold mostly throughout the Midwest, like the famous Illinois dealership of Fred Gibb. There were even ZL-1-powered Corvettes.
The ZL-1 aluminum big-block (PN 12370850), is newly cast from 356-T6M alloy, but cast from
The best figures put the number of ZL-1 Camaros built at 69 and the number of ZL-1 Corvettes at just two. To be honest, there weren't that many built for racing, either. A couple of hundred, maybe. Those lucky enough to get their hands on one usually enjoyed success at the track, but it was a rare animal, even in its heyday.
From the start, the ZL-1 was intended as a race engine. The street versions were de-tuned just enough to make them somewhat livable on the street-or, at least, on the drive to the dragstrip. With more than 500 horses and solid lifters, the ZL-1 427s were touchy and required constant valve adjustments. But, the all-aluminum motor saved about 100 pounds, compared to a big-block setup, which was a welcome benefit to nose-heavy Camaros and Corvettes.
Although the engines saved weight, they added cost. The ZL-1 just about doubled the price of the Corvette-same for the Camaro. Buying one for your race car wasn't cheap, either. By the mid-'70s, the expensive, exotic ZL-1 race engine faded away.
Throughout its production run, though, the casting of every ZL-1 aluminum engine block was handled by Winters Foundry. Known for its trademark "snowflake" logo, Ohio-based Winters has been a longtime supplier to General Motors. While the ZL-1 history dates back more than 30 years, the last few blocks were poured 20 years ago-just a footnote in Winters' records. It was a footnote, however, that didn't go unnoticed by some fast-thinking GM Motorsports personnel.
One of the most significant upgrades since the ZL-1, which was last made in the '70s, is t
In the early-'90s Winters was changing its casting process from the more traditional sand-cast method to a permanent-mold setup. The company, after deciding to clear out some of the old sand-cast tooling, sent a memo to GM asking if any of the old tooling was wanted. When the list reached the desk of one Motorsports staff members, a particular seven-digit casting number, 3946053, piqued his curiosity. After a little research, it was discovered to be the ZL-1's tooling. After discussing the finding with a block engineer and fellow performance zealot at GM Motorpsorts, a road trip to Canton, Ohio, was planned to examine the tooling.