1956 Chevrolet Corvette - Z56

Sunset Pearl '56 Vette Rod Combines Best Of Old And New

View Full Gallery

What generation of Corvette makes the best Vette Rod? Some say the C2, combining the classic Sting Ray styling with latter-day Vette power and handling. Some say the C4, as a well-used one can be turned into quite a performer and looker (like what we're doing with Project C4orce). Wayne Ausherman's '56 makes a strong case for treating first-generation Corvettes to Vette Rod-style powertrain and chassis updates, along with some custom touches all its own.

Corp_0911_02_ 1956_chevrolet_corvette_coupe Orange_glow_interior 2/10

If you're afraid that Wayne tore up an ultra-rare '56 to build his beauty, don't worry...Wayne says that the driver-quality C1 that he found in Connecticut was far from a Top Flight car. "It was not the original color, matching numbers, or anything like that, but it was a decent driver," he says from his Frederick, Maryland, home. "The owner was retiring and moving to Florida, and he couldn't find anyone up there to put air conditioning in the car. He said that he wasn't going to have it in Florida without A/C in it. I wanted the car, so I didn't tell him about Vintage Air-and it has Vintage Air A/C in it now!"

Wayne enjoyed his '56 in its as-purchased state for about a year, and then he decided to do something with it. That involved swapping the original front and rear suspension for Jim Meyer's high-performance hardware. "I like the Jim Meyer stuff, because I like to play with the car a little at the dragstrip-the 9-inch and four-link under the car, and coilovers-I like that idea," says Wayne. "Of course, having tubular A-arms and coilovers up front with rack-and-pinion steering-I like that too."

Corp_0911_03_ 1956_chevrolet_corvette_coupe Interior_steering_wheel 3/10

He also liked not having to replace his C1's original frame, as the Jim Meyer Racing parts were bolt-in replacements for some OEM hardware whose designs dated back to the '40s. "You don't have to cut your original frame up," Wayne says. "You do have to make a couple little tack welds, like for the rear sway bar mounts, but nothing that can't be ground off and fixed (restored) later. It's not like you're cutting the frame up."

Even though Wayne did much of the work himself, he did get some help with the '56's frame." I took it up to my brother's house, in a three-car garage that he has, and re-did the whole suspension. That's where I POR-15'd the frame."

Corp_0911_04_ 1956_chevrolet_corvette_coupe Flame_shifter_knob 4/10

Another difference between Wayne's car and other Vette Rods: the powertrain. Instead of picking an LS-series engine or a later version of The General's venerable small-block, he stuck with the non-original engine that was in the car when he bought it. "It's a 283, whose block was bored out to four inches, giving 301 cubic inches," Wayne says. "It's got a good Comp Cams camshaft in it, and I put a quiet gear drive in it. It's got heads from a 365 horsepower 327, with 2.02-inch intake valves, and it's also got a 750 Holley on it." Backing the now-301 is a Muncie M-21 four-speed with a Hurst Competition Plus shifter, with a 3.55-geared nine-inch rear end putting the power on the pavement via the Goodyear-shod American Racing Torq-Thrusts.

Wayne definitely went the custom route when it came to the '56's body. Instead of major modifications that you'd see right away, Wayne added details and custom touches that you notice the second or third time you look at them. Those include: A NACA duct in the hood, filled-in stock exhaust holes, a '55 rear bumper, tan vinyl on the auxiliary hard top, and "Z56" emblems on the sides, which Wayne made with a CNC machine after he scanned in the "Z06" emblem.

Corp_0911_05_ 1956_chevrolet_corvette_coupe Rear_wheels 5/10

As for the body and interior color, Wayne says they're something that a lot of people ask him about. "Everywhere I go, the first thing that people want to know is, what color is it? It's House of Kolor's Sunset Pearl, and the dash is Tangerine Metalflake." Those colors were sprayed on by Wayne's buddy, Mickey Schultz, in Union Bridge, Maryland.

Instead of being a "perpetual project" that's never quite finished, Wayne got his '56 done to the condition you see it here in about two and a half years. What's this Z56 like to drive? "It's a ball, but it sure does draw attention," says Wayne. "The car is very adjustable in height, ride, and everything."

If you're considering a first-gen Vette Rod of your own, following Wayne's example is a good idea. "I'm not a purist, and the car was not numbers-matching when I bought it," he says. "This is what I wanted to do-I wanted the old look with later technology, that I could get in and drive to Ocean City, Maryland, or anywhere I want. It's got air conditioning, power windows, rack-and-pinion steering, four-wheel disc brakes-and you can do all that without ruining a good car."

Corp_0911_06_ 1956_chevrolet_corvette_coupe Front_grille 6/10

Data File: '56 Chevrolet Corvette coupe
Owner: Wayne Ausherman, Frederick, Maryland

Corp_0911_07_ 1956_chevrolet_corvette_coupe Backview 7/10

Body
Modified production ’56 Corvette
Body Modifications: Handmade Z06-style “NACA duct” hood scoop, Z06 rear brake scoops, ’55 Corvette rear bumper, ’59 Cadillac taillights, exhaust bezels capped/filled, lowered tag frame, ’06 Corvette exhaust tips, vinyl-covered hardtop, one-off Z56 emblems, crossed-flags emblems replaced OEM nose/deck emblems
Bodywork: Mickey Schultz, Union Bridge, Maryland
Paint: House of Kolor’s Sunset Pearl acrylic lacquer; paint preparation and applied by Mickey Schultz

Chassis
Frame: Production ’56 Corvette
Suspension: Jim Meyer Racing front/rear independent suspension with QA1 shocks all around
Steering: Rack and pinion with chrome ididit column
Brakes: Discs at each corner replaced the overmatched OEM drums
Wheels: American Racing Torq-Thrust, 15 x 6 inches front, 16 x 7 inches rear
Tires: Goodyear Integrity, 205-65R15 front, 235-60R16 rear

Corp_0911_08_ 1956_chevrolet_corvette_coupe Corvette_rear 8/10

Engine
Modified chevrolet small block v8
Engine Built By: Owner
Displacement: 301 cubic inches
Modifications: Original 283 block bored out to 4 inches, TRW pistons, steel connecting rods, forged steel crankshaft
Compression Ratio: 10.5:1
Cylinder Heads: Modified cast-iron production smallblock Chevrolet 327/365 heads (2.02-inch intake, 1.94-inch exhaust)
Ignition: AC/Delco dual-point distributor with Taylor wires and Billet Specialties wire looms
Induction: Weiand cast-aluminum intake manifold with a Holley 750 double-pumper carburetor
Camshaft: Comp Cams hydraulic
Exhaust: Hooker Headers with 1 5/8-inch tubes and 3-inch collectors, 2 ¼-inch stainless steel pipes and Flowmaster mufflers
Horsepower: 375 @ 6500 rpm (Estimated)
Torque: 420 ft. /lbs. @ 6500 rpm (Estimated)

Corp_0911_09_ 1956_chevrolet_corvette_coupe Engine 9/10

Transmission
Muncie m-21 close-ratio four-speed manual
Shifter: Hurst “Competition Plus” with custom shifter ball
Rear End: 9-inch rear end with Dutchman axles and Jasper 3.55:1 rear gears

Interior
Restored/modified ’56 corvette
Interior: Restoration work by Classic Upholstery & Glass Company, Frederick, Maryland
Modifications: Billet Specialties steering wheel, ’58 Corvette center console modified to fit power window and HVAC switches, ’61 Corvette nose letters placed vertically on glove box, lower dash painted Tangerine Metalflake and pinstriped by Nelson Grimes
Seats: Restored production ’56 buckets, upholstered in beige/tan ultra leather
Carpets: Auto Custom Carpet dark tan (loop-pile)
Instrumentation: Production ’56 Corvette (0-140 mph speedometer plus fuel level, ammeter, coolant temperature and oil pressure gauges)
Sound System: JVC AM/FM/Cassette player with 12-disc CD changer, Pioneer speakers
HVAC: Vintage Air

Corp_0911_10_ 1956_chevrolet_corvette_coupe Front_wheels 10/10
« Prev 1 2 Next »

MORE PHOTOS

VIEW FULL GALLERY

COMMENTS

TO TOP