1968 Chevrolet Camaro Convertible - What It Was Like

Jimmy Jackson and The Bad ’68

Ro McGonegal May 1, 2012 0 Comment(s)
View Full Gallery

The energy this stuff dissipates comes easily from a GMPP 454 LSX crate motor that produces horsepower and torque in the fat 600 range—more than enough grit to blow Jimmy into the middle of next week. Since the 454 isn’t a production engine and its destination could be anywhere but a stock vehicle, it’s only available minus intake manifold and oil pan. GAC took Jimmy’s from Scoggin-Dickey. While GAC didn’t see reason to make more power, they treated the ancillary systems with respect.

Camp 1205 09 Z 1968 Chevrolet Camaro Convertible 2/20

At the top of the engine, an unforgettable fabricated individual-runner intake manifold contracted by Scoggin-Dickey from an undisclosed source to provide a low engine profile, enhance boost applications, and to maintain low-end torque. It’s fed via a Ricks Stainless Tanks fuel cell and a Nick Williams 102mm throttle body. A Mast Motorsports cast sump holds five quarts of lube. GAC made the air cleaner housing and fronted it with a Spectre element. The DSE exhaust headers were left uncoated and GAC continued the tract with a stainless 2½-inch system in and out of an X-pipe and Flowmaster 40-Series muffs. The Vintage Air Front Runner accessory drive collects alternator, Sanden compressor, and OE power steering pump. Moxie estimates: 630 horsepower; 540 torque.

Jimmy might be a geezer but Jimmy’s a speed freak, remember? And when a geezer’s car sports a clutch you’d better rethink your howdy-do. The guy’s still got blood in his eye and he won’t be going down easy. So the drivetrain is bulletproof like the engine. Right off that 8-bolt crankshaft flange is a special flywheel, followed by American Driveline pieces, including an 11-inch carbon-fiber clutch and safety shield/bellhousing. The Tremec six-gear is manipulated by a GAC-built shifter. Torque flushes down an American Driveline prop shaft and heads straight for the DSE/Moser 9-inch. A limited-slip, 31-spline axles, and 3.73s included.

Camp 1205 11 Z 1968 Chevrolet Camaro Convertible 3/20

We think success here has a great deal to do with the patience invested in the sheetmetal and the subtle but critical paint treatment. All the things the Greenings did have been done before, but they manage to make them look fresh and original. GAC (specifically Jeff Greening, Ted Dobkowski, and Jacob Edens) removed the hairpin of a bumper, painstakingly installed and aligned RS headlight covers, installed the Camaro Central grille, customized the parking lights, wiped off all the side markers, modified the rear pan and original bumper, and (no small feat) pulled all the seams tight.

Jeff Greening applied the Galsurit/55 Line Orange and the GAC satin stripes. Underhood finishing is superb, marked randomly by a knurled knob or a smooth countenance where there were neither in the original. There’s even serendipity in the copper-tan burnished header pipes, ever the foil for the satin black background and orange-glow exterior.

Camp 1205 12 Z 1968 Chevrolet Camaro Convertible 4/20

Suffice that Jimmy’s Camaro has all the comfort and convenience of a regular automobile, but visual testament is difficult to come by. Everything inside is subdued or it collaborates with another section of the interior or the exterior proper. Can you see the fine orange stitching in the seats and the muted orange strips on the doors and how they merge with the exterior theme?

Paul Atkins Hot Rods and Interiors in Hanceville, Alabama, put the whole thing in perspective. Though they strove to maintain original appearance and terrain, they worked the seats, front and rear, removing the springs, welding in bolsters, and finishing with foam. Before the leather was fit and molded, GAC fabbed a seatbelt attachment bar that could be quickly deconstructed to turn the Crow Enterprizes five-point harnesses into simple lap belts. About the time the Classic Instrument All American Series gauges and Lecarra Mark 9 steering wheel (check out the custom machined horn button) were being placed, GAC put in the Camaro Central glass. Jimmy’s not going to tell you that the engine makes its own song; he opens up the stereo wide. Atkins Hot Rods insinuated the Alpine head, CD, speakers, and special enclosures.

Camp 1205 13 Z 1968 Chevrolet Camaro Convertible 5/20

In our mind’s eye, we can see some guys fretting beneath the hood or beneath the car under the rear end just slightly claustrophobic or bending and cursing silently as he wipes down the exterior, but we think Jimmy’s most happy slinging the wheel and plowing gears foot pressed to the wood. He’s a speed freak, you know.




Connect With Us

Get Latest News and Articles. Newsletter Sign Up

subscribe to the magazine

get digital get print