Super Chevy Magazine Homepage Super Chevy
Facebook Click here to find out more!

1967 Chevy Camaro - Starting From Scratch

After Showing His Camaro And Winning Nothing, Ed Thomas Decided It Was Time To Go Back To The Drawing Board On His '67 F-Body.

By , Photography by
1967 Chevy Camaro Wheels

Sometimes to get what you want, it's necessary to start all over again. Ed Thomas bought his '67 Camaro in 2005 in Pro Street trim. After several unsuccessful attempts to win anything at various shows, Ed took some time to evaluate the F-body, and decided that if he ever wanted to go home with the gold, the car would need to be totally rebuilt. After a phone call to Wayne Patton at Hot Rods Plus in Rhodesdale, Maryland, Ed sat down with Wayne to map out a plan to rebuild the Camaro into a top-notch show contender.

1967 Chevy Camaro Custom Steering Wheel

A week later at the Goodguys show in Charlotte, North Carolina, Ed and Wayne were talking with a Total Cost Involved rep and learned its new tube-frame kit for the '67 Camaro had just come out. Soon after a deluxe kit including show quality brakes and suspension was ordered from TCI, and the crew at Hot Rods Plus began tearing Ed's ride apart to start the rebuild.


1967 Chevy Camaro Custom Front Grille

During the teardown, rust was found in the doors and quarter panels, and with the ultimate goal of competing for a prestigious Riddler Award in mind, it was decided to weld in all new sheetmetal. Just about everything except the roof was replaced with fresh metal.

As the build progressed, everything was pretty much going according to plan to build a unique hot rod. On the outside, the various lines and curves of the Camaro were gently massaged and modified to smooth out the car's profile, and subtle custom accents such as the vent windows being removed, hidden signal lights installed, and tucking the bumpers close to the body were performed. Once everything with the body was set, the exterior was sprayed in PPG Wineberry Red.

On the inside, the interior was discarded in favor of a fully customized and hand-fabricated dash, customized center console, and rear seat. Once the fabrication was finished, everything inside was either sprayed in Wineberry Red to match the exterior or wrapped in white ultra leather for a smooth, but plush feel. Classic Instruments gauges were installed to keep tabs on all operations, including a one-off custom clock so keeping track of seat time in the Camaro wouldn't be a problem.

  • 1967 Chevy Camaro Rear View
  • 1967 Chevy Camaro Big Block
  • 1967 Chevy Camaro Rear Taillights
  • 1967 Chevy Camaro Wheels
  • 1967 Chevy Camaro Nos Injectors
  • 1967 Chevy Camaro Headlight
  • 1967 Chevy Camaro Custom Interior
  • 1967 Chevy Camaro Rear Taillight
  • 1967 Chevy Camaro Custom Parts
Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!

*Please enter your username

*Please enter your password

*Please enter your comments
Comments:
Not Registered?Signup Here
(1024 character limit)
Super Chevy