Super Chevy
Click here to find out more!

1967 Chevrolet Camaro RS - Employee Enthusiasm

The 8-Second Camaro Of A Career GM Man

By Barry Kluczyk

When Ronald Strayhorn signed on for service with General Motors, he hitched up for a lifelong tour. With time at Buick in Michigan, and currently serving as regional service manager in suburban Atlanta, Strayhorn is a ranking GM manager with a passion for his company's products.

He's also a drag racing nut.

"I got into it with my cousins when I was young," says Strayhorn. "Even when I had to take a break from it for my career, I never lost the interest in racing."

For the last decade Strayhorn has owned a 10-second '66 Nova, but in 2000 he got the itch to go much faster. After locating a '67 Camaro rolling chassis, the gears clicked and Strayhorn commissioned one of the baddest First-Gen Camaros we've seen in a long time.

And though it appears like it's a show queen, with its wet-looking black paint and unique induction system (the car was runner up in Pro Engineered at the Atlanta Super Chevy Show), this Camaro is a serious contender in quarter-mile competition. To date, Strayhorn has piloted the car to best e.t. of 8.66 at 155 mph.

"The car goes straight as an arrow down the track," he says. "There's no drama or anything; it's deadly consistent. I just hang on for the ride."

As for that interesting induction setup on the port fuel injected big-block, it's a modified version of GM Performance's Ram Jet, with a one-off throttle body crafted by Pro Mod racer and fuel injection whiz Harold Martin.

Before the injected Rat motor went into place, the '67 Camaro that was transformed into a ground-hugging ground pounder had to be bent into shape. Already a rolling chassis when he bought it, the car was sent to Sheppard Race Cars, in Covington, Georgia, to be completed.

There, the jumble of unwelded moly tubing that comprised parts of the chassis was joined to conform to 25.1C specifications (it has since been certified). The all-steel body was put on a diet, too, and the front end, doors, deck lid and bumpers were replaced with fiberglass parts.

Adding a nice bit of detail to the plastic nose is the use of a real RS grille. Sheppard Race Cars also fabbed up the car's carbon fiber rear wing. When it came time to lay down color, the car was sent to Adrian's Customs, where the black paint and silver stripes were sprayed.

As for the Harold Martin-built big-block, Strayhorn originally approached the Pro Mod racer with the idea for a conventional carbureted setup. But Martin, whose Detroit-area business, Martin Motorsports, also does fuel injection development work for GM, wasn't going to have any part of that antiquated air/fuel mixer. With that, the unique three-butterfly throttle body idea was born. Besides looking like nothing else in the pits, Martin says there are strong advantages to the design.

"The engine has great idle speed control, which it wouldn't have with one, large blade," he says. "With three blades, we get the necessary cfm and great idle characteristics."

We can attest to the 800hp motor's docile nature. During our photo shoot, the car fired up, idled and maneuvered at low speed very well.

Martin started with one of GM's Ram Jet 502 crate motors and opened it up to 541 cubes. Custom forged pistons that squeeze into the chambers of Dart aluminum heads provide a relatively mild compression ratio of 11:1. The heads' passages have been ported and their bowls blended.

Atop the punched-out short-block and deep breathing heads, Martin found the stock Ram Jet intake was lacking in the airflow department.

"We hogged out the runners to meet the ports of the heads," he explained. "That's when we determined the flow at the throttle body would need to be increased, too. We needed about 1200 cfm."

The stock Ram Jet's twin 48mm throttle body flows about 650. To accommodate Martin's custom three-blade setup, the inlet on the Ram Jet's plenum was opened up, too.

By Barry Kluczyk
Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
Super Chevy