Ahh, the holidays! They are right around the corner and will be here before you know it. And if you have a few hot rodders in the family, there’s a good chance you’ll be doing some last minute scrambling to find just the right gift for their high-performance tastes.
Your pals at Chevy High Performance understand that the struggle is real and we are here to help you make it through another holiday season without missing a beat or stepping one foot into an overcrowded shopping mall where everyone seems to be going in the opposite direction than you. And there will be no competing with that crazed soccer mom for the last open parking stall.
In the Chevy High Performance Holiday Gift Guide you’ll find some great ideas to help you pick something up for the muscle car enthusiast friend or family member and you won’t even need to leave the house. This helpful shopping guide will point you to some of the best aftermarket parts available in the automotive industry. Whether you need big-ticket performance suspension parts, brakes, a new transmission, or some smaller stocking stuffers, there is a good chance you’ll find something right here in the 2018 Chevy High Performance Holiday Gift Guide.
SPEC, the innovator in GM LS clutch technology, introduces their new line of single-disc performance clutches for C5 and C6 Corvettes. The new design is currently shipping and features the same extreme capacities you would expect from a SPEC clutch, but with a pedal effort reduction of over 10 percent and no measuring/shimming and no hydraulic upgrade installation. These kits have the same release window as the original self-ratcheting units, but with the increased performance, reliability, and safety these cars demand. The kits support power levels up to an amazing 1,000 lb-ft of torque for the street/strip units and 1,200 lb-ft for drag-specific units.
Classic design meets modern technology with YearOne’s line of upgraded wheels for Chevy muscle cars. Designs include the Corvette Rally, the Magnum, the five-spoke Z28, and the N90, all in 17-inch diameters with aluminum construction. Complete wheel kits with lug nuts and center caps ship free in the continental U.S.! For more information visit yearone.com or call 1-800-YEARONE.
Put more horsepower to the ground with Energy Suspension’s Hyper-Flex Polyurethane Differential Carrier bushing set (PN 3.4169) for the 2010-’15 Chevrolet Camaro! With Energy Suspension differential carrier bushings, the rear differential stays in place during hard launches, creating snappier throttle response and more immediate acceleration. Energy Suspension’s fine-tuned Hyper-Flex polyurethane also maintains vibration isolation characteristics that keep your ride daily driver friendly. Available in red (R after part number) or black (B after part number). MSRP $62.79
Interactive Jewelry for Men and Women. Tug on your heartstrings with the Gear Necklace by sliding the pendant along its chain and setting the gears in motion. Spin in style with the Gear Ring by turning the outer rims so that all the gears rotate in unison. Patented. Lifetime Warranty. Free Shipping.
Rechargeable Pod Light — $29.99
Easy To Hold. Easy To Mount.
Bright enough to light your workspace, small enough to fit in the palm of your hand. The 400-lumen Rechargeable Pod Light provides 4.5 (high) to 9+ (low) hours of directional light on a single charge. The soft, rubberized base protects against scratches.
Sidekick Stool With Tool Caddy - SK2 — $99.99
The Perfectly Tuned Shop Stool.
Full of function and thought, MYCHANIC’s new garage stool brings modified to a new level. From the adjustable height seat, removable tool caddy, and stand for your mobile device, power tool holster, and easy-reach hardware bins, this shop stool is the opposite of stock.
This American-made 1968-’74 Chevy Nova Pro Touring IFS is engineered for easy installation, performance driving, and a broad range of alignment adjustments. With the popularity of autocrossing and road racing growing every day, TCI Engineering built a no-compromise front clip that will not break the bank. According to TCI, this front clip will provide the ultimate in handling, weight savings, and strength.
Total Cost Involved Engineering
PerformaBuilt Transmissions is proud to offer the first, and, according to the company, possibly the only legitimate 1,000+ hp 4L60 series transmission: the PerformaBuilt Level 3 Black Edition.
While the Black Edition is at the top of the PerformaBuilt line, they also offer performance and off-road transmissions for customers with different power levels and applications.
All of their transmissions come with a minimum 1-year warranty and are available with a 2-year warranty option. NO exceptions, even for “racing.”
Now on DVD - Big Red: The Complete History 1987-2015. This is the critically acclaimed docu-series that chronicles the 30-year history of “The Baddest Camaro Ever.” Originally aired on NBCSN, now you can experience all of The Original Outlaw’s racing adventures in this stunning 8-hour series presented in HD/5.1 Surround at your leisure. The disc set includes over five hours of bonus content, complete racing sequences, and never-before-seen footage. This Collectors Edition Box set includes the exclusive 1:43 scale Big Red die-cast from Greenlight Collectibles. Order Now! On Blu-Ray and DVD.
Big Red Camaro
Undercover Innovations has got you covered, literally. If you have an overheating problem with your classic car, Undercover Innovations might have a solution for you. Or if you’re tired of looking at the unattractive front of your radiator, let them dress it up. GMs, Fords, Mopars—models are added all the time. Licensed by GM, engraved logos and custom engraving is also available. Valve covers with custom engraving are available, too.
MuscleRods offers everything you need to drop an LT- or LS-based engine into your ride. The bolt-in engine mount and crossmember kits are designed to be vehicle specific. They support all early- and late-model transmissions so you can run a new eight-speed automatic or a classic Muncie. Also, headers, oil pans, accessory drives, radiators, wiring, and line kits are all designed to work together. Whether you’re using a pullout truck powertrain or a new LT4 crate engine MuscleRods.com has you covered.
The Chevelle rack-and-pinion cradle is precision jig-welded and installs in the stock steering system mounting holes.
• All-new power rack-and-pinion with lifetime serviceability
• Billet-joint and column adapter include
• More than six inches of travel and full turning radius
• Bolts into existing chassis with no suspension modification
USA-230, MSRP $179
Custom Autosound’s USA-230 is an excellent choice for classic car or truck enthusiasts looking for a more affordable radio without sacrificing quality electronics and a classic stereo look. It has been designed to fit in the stock dash without any modifications required.
• AM/FM stereo
• 200 watts (4x50)
• Auxiliary input (RCA rear) RCA to 1/8” pin jack included
• Digital clock
• Electronic tuner
• 16 presets (4 AM, 12 FM)
• 4-channel RCA preouts
• 4-way fader
• Power antenna lead
Delta PAG’s high-performance brushless cooling fans use cutting-edge technologies for ultimate cooling performance.
Moves over 2,800 cfm at only 2.70 inches thin - Reduce amp draw (only 13 amps for 2,800 cfm) - Increase reliability (lasts 10x longer) - Infinitely adjustable - Soft-Start tech eliminates power spikes - The thinnest, most efficient 2,800-cfm fan on the market - With Delta PAG’s digital controller you can adjust speed and on/off temperatures for two fans independently. Also, control fans with your OEM/aftermarket computer. Fan kits include everything you need, such as waterproof wiring harness, digital controller, brushless fan and sensor. No relays or temp switches are needed for a brushless system, increasing reliability. A fabricated custom aluminum shroud can be had for only $89. Complete cooling packages also available: radiator, shroud, and fan(s) for any vehicle for as low as $600.
Larson, Lutz, Bailey, DragWeek, Roadkill, Bonneville, Texas, and Ohio Mile. The highest horsepower handling overdrives you can buy—and you can bolt one on in a couple of hours. Keep your existing manual or automatic transmission; get 28.6 percent faster cruising speed with a warranty that covers you even at the dragstrip. Turn your three-speed automatic into six close ratios, which is exactly how the late-model OE transmissions work. Complete overdrive kits start at just $2,695 for a limited time. Call 800.999.9555 about your application or visit www.gearvendors.com.
Art Morrison Enterprises offers its line of GT Sport high-performance replacement chassis for 1949-’54 and 1955-’57 Chevrolets, 1953-’62 Corvettes, 1947-’53 Chevrolet trucks, 1959-’64 Impalas, and 1964-’72 GM A-bodies. It features all of the necessary body mounts, bumper mounts, core support, and engine/transmission mounts. Available with power rack-and-pinion steering, performance-tuned independent front suspension, triangulated four-bar rear suspension, and 9-inch housing. These chassis are a true bolt-in replacement that will dramatically improve the ride and handling of your classic car.
Art Morrison Enterprises Inc.
CNC machined 6061-T6 billet aluminum alternator, power steering, and A/C brackets for 1997-’15 Gen III and Gen IV LS engines using the factory CTS-V or LSA harmonic balancer. The kit includes 6061-T6 billet aluminum eight-rib power steering and alternator pulley, idler pulleys, tensioner, billet water pump spacer kit, billet power steering return fitting, serpentine belt, and Grade 8 zinc-coated Allen bolts.
Dirty Dingo Motorsports
Fully machined billet aluminum master cylinder unlike any other available today. Baer engineered the Remaster with a compact design to make fitment easier in a variety of applications. The Remaster is a direct replacement for other master cylinders and is available in 15/16-, 1-, or 1 1/8-inch bore. Machined in Baer’s hometown of Phoenix, the Remaster features specific left or right outputs, knurled fill caps, provision for proportioning valve mounting, and a unique laser etched body.
Baer Brake Systems
UMI Performance is proud to announce the game changing Corner Max kit. Designed as a complete package from the ground up, the Corner Max kit is perhaps the best performing stock frame suspension on the market. This kit comes complete with upper and lower tubular control arms, springs, UMI monotube shocks, and a spring-matched sway bar. Proudly made in the USA in Philipsburg, Pennsylvania. For their complete product line, visit umiperformance.com.
Pricing starts at $2,419.99
Stage 2 Pro-Touring Kit
Ultimate performance at an affordable price! Includes front and rear powdercoated Pro Touring antisway bars, dual-adjustable front coilover system, rear adjustable shocks, rear lowered leaf springs or rear trailing arms depending on the application, plus powdercoated Totally Tubular front upper and lower control arms. Sway bars reduce body roll while helping control over/understeer in corners. Lower your car safely and dramatically improve handling! Threaded shocks allow ride height, compression, and rebound adjustments. CPP parts come with a lifetime warranty.
Classic Performance Products
Front Coil-Over Conversion Kit
Street rod stance and track-proven performance for your 1963-’87 Chevrolet C10 truck! Includes dual-adjustable coilover shocks, wrench and bearing kit, TIG-welded Totally Tubular upper/lower control arms, plus mounting brackets and hardware. Control arms include D-spec bushings, DOM steel construction, application-specific ball joints, and black or silver powdercoated finish. Shocks have separate adjustments for compression and rebound, and easy spring preload adjustment. Pair with drop spindles for the ride height desired. CPP products have a lifetime warranty.
Classic Performance Products