Subscribe to the Free
Newsletter

1962 Corvette Sells at Barrett-Jackson for $169,400

Boyd’s Bespoke Vette: Vintage Fabrication built this 1962 C1 to fit

John Gilbert May 3, 2016 0 Comment(s)
View Full Gallery

It isn’t always not being able to raise enough money that stops a person from buying a collectible Corvette, and that holds true especially if the series under consideration is a C1. Joe Boyd liked C1 Corvettes but, unfortunately, he was too big to fit into one. For Joe, buying a 1953-’62 Corvette was completely out of the question until Vintage Fabrication, a shop that had built four or five custom cars in the past for Joe, told him they could custom build a C1 to fit his size.

The search was on and it wasn’t long before Joe ran across an incomplete 1962 Corvette basket case that was a perfect candidate to build restomod style. The last-year C1 was loaded onto a flatbed car hauler and transported to Vintage Fabrication’s 10,000-square-foot shop in Independence, Missouri.

1962 Chevy Corvette Front View 2/52
1962 Chevy Corvette Front View Headlights 3/52
1962 Chevy Corvette Quarter Panel Jpg 4/52

Starting from the frame up, Boyd’s 1962 Corvette was destined to become a subtly radical stunner. The 1962 chassis, with its 1954 Chevy passenger car DNA, was scrapped and an SRIII Motorsports Stage Two tubular chassis was put into place. As understated as the 1962 body became by customizing with shaved door handles, filled cowl vent and frenched headlights the undercarriage details went in the direction of mirrors on the floor show car. At the front end of the birdcage-configured tubular chassis there’s a C4 IFS frontend with power rack-and-pinion steering and fully polished aluminum upper and lower control arms, spindles and brake calipers. Using Z51-spec brakes increased the front rotor diameter from 12 to 13 inches and meant directional internal cooling fins were included.

For rear suspension the fully polished show car treatment was repeated on all aluminum parts. In place of the original equipment front and rear C4 transverse fiberglass monoleaf springs there’s a QA1 coilover shock absorber at each corner. Front and rear antisway bars control body roll. Airy 18-inch front and 20-inch rear Rocket Booster chrome five-spoke mags feed air to assist with brake cooling. For front tires there’s a pair of 225/40ZR18 Nexen N3000s and on the rear two 245/40 ZR20 Nexen N3000s.

The interior space is where Vintage Fabrication’s Bobby and Bruce Schumacher redesigned the 1962 Corvette to accept Boyd’s plus-sized stature. Adding extra arm length was accomplished by shaping the dashpanel to follow the curvature of the passenger-side grab bar cove. The custom curved dashpanel is packed with Classic Instruments All American Nickel Series gauges. In place of a stock sized, flat three-spoke Corvette steering wheel there’s a dished American Retro shrunken 1955 Chevy 15-inch steering wheel painted body color. A smaller steering wheel hoop helps to quicken the steering ratio and makes room for expanded diameter stomachs.

1962 Chevy Corvette Interior 5/52
1962 Chevy Corvette Gauges 6/52
1962 Chevy Corvette Shifter 7/52

Creating custom interiors is one of Vintage Fabrications specialties. They find most people choose the exterior color of their car first and then try to find an interior color to complement the exterior. Bobby Schumacher advises it’s easier to pick out the upholstery color and then pick or custom mix an exterior color to go with the upholstery. Schumacher and Boyd agreed Papyrus hued Ultraleather upholstery would fit the bill nicely by adding a rich warmness with the supple feel of synthetic glove leather.

Starting with the 1953 Corvette, due to spatial constraints, it was one of the first cars equipped with a hybrid transistor-vacuum tube radio. Lack of space for radio placement is still a problem when comes to upgrading a C1 Corvette sound system. To eliminate mounting concerns the Schumacher crew installed Custom Auto Sound’s Secretaudio system backed up with four midrange, two tweeters, and a hidden subwoofer. The interior design carried into the trunk with Papyrus Ultraleather covering custom-molded side panels and deep plush carpeting on the trunk floor.

Every phase of constructing Joe Boyd’s Corvette was handled in house with the exception of custom painting the car. For paint, the ’62 was sent to Carrender Collision in Buckner, Missouri, where Aron Carrender shot it in a custom mixed Axalta pearlescent version of Fawn Beige. For the two-stage clear topcoat Aron sprayed Axalta 7779 clear and then color-sanded and rubbed it to a mirror-like finish.

1962 Chevy Corvette Engine Bay 8/52
1962 Chevy Corvette Engine Bay 9/52
1962 Chevy Corvette Wheel 10/52

Having extra horsepower under a Corvette hood has been a Chevrolet tradition ever since the factory ditched the Stovebolt 6 in 1955 and went with V-8 power. For a healthy amount of horsepower Vintage Fabrications dropped in a 2006 LS2 6.0-liter engine with a Magnuson supercharger. To give the LS2 that old-time 327 Corvette look, seven-fin valve covers were adapted. An educated guess would place the blown LS2 at around 525 horsepower. The transmission is TREMEC TKO 600 six-speed.

At the 2 1/2-year point in the build Joe Boyd learned he had terminal cancer. Joe passed away on the day his ’62 Corvette crossed the block and the Barrett-Jackson Scottsdale auction. The street rodder style Vette changed hands to a real estate developer named Steve Clark from Wichita, Kansas. Steve took the ’62 to Devlin Rod & Customs in Wichita to add a few more bits of chrome and adjust the suspension to his liking. The photos seen in this article were taken at the tag end of Steve’s 4 1/2-year curatorship of the car. Steve sold the ’62 Corvette at the Barrett-Jackson Palm Beach 2016 auction for $169,400.

1962 Chevy Corvette Side View 11/52
1962 Chevy Corvette Rear Side View 12/52
X

COMMENTS

Connect With Us

Get Latest News and Articles. Newsletter Sign Up

sponsored links

subscribe to the magazine

get digital get print
CLOSE X
BUYER'S GUIDE
SEE THE ALL NEW
NEWS, REVIEWS & SPECS
TO TOP