1969 Chevrolet Camaro - Five-Star Camaro

LS Power and Modern-day Suspension Make this Classic Muscle Car 100 Percent Cool

Cam Benty Apr 22, 2014 0 Comment(s)
View Full Gallery

Carl Schultz had a ’69 Camaro. It was a clean, very straight, older restoration with a classic drivetrain that was in need of new power and suspension. With dreams of a more modern and efficient muscle car, Carl met with Norm Brandes and Jim Daley from Westech Automotive (Silver Lake, Wisconsin) at the 2012 Performance Racing Industry show in Orlando, Florida. Shortly thereafter, a complete Camaro, ready for performance upgrades showed up at their shop.

After serious discussions among the three of them about potential forms of LS engine transplants, Carl, owner of Five Star Race Car Bodies, settled on a new GM Performance LSX 454 engine cranking out over 620 horsepower. To that total, Westech Automotive added a FAST LS intake with Big Mouth fuel injection inlet to build upon that impressive power.

1969 Chevrolet Camaro Engine Lift 2/6

The original plans called for a 200-4R automatic transmission to replace the apparent factory TH350 currently in the car. A total redirection to a Tremec TKO 600 five-speed was made after it was determined that the original fitment was a four-speed manual transmission. To ensure positive tire engagement, a heavy-duty clutch and strong/lightweight driveshaft were installed to control the massive horsepower and torque.

1969 Chevrolet Camaro Engine 3/6

To increase the driveability, they engineered a throttle-by-cable fuel injection system over the throttle-by-wire controls more commonly found with this engine. The spark plug coil packs were mounted by the oil pan to keep all wiring out of view, and the plumbing was contained with stainless steel tubing, making for a super clean engine compartment.

But it was clear to both Norm and Jim, along with Carl, that the car had to stop and handle as good as a new Camaro. Happy with the modifications made to modernize the power and throttle response, they turned to the suspension.

1969 Chevrolet Camaro Side Left Quarter 4/6

To get the right handling and chassis strength, they called on Heidts Hot Rods and Muscle Cars to achieve those key features. In the rear they installed a Heidts four-link suspension, 2 inches narrower than stock to accommodate the increased-width wheels and tires they had planned.

Up front, they used the Heidts Pro-G subframe featuring rack-and-pinion steering for crisp cornering and excellent steering response. Massive-diameter Wilwood disc brake rotors accompanied with six-piston front and four-piston rear calipers net better-than-modern-car stopping power.

1969 Chevrolet Camaro Shop 5/6

Finishing off the Camaro, Norm and Jim attended to some of the spots needing touch-up, but for the most part left the original Camaro Red exterior as it arrived. To that they added SS-style graphics and the original “350” cid engine emblems to fool the competition as to the stout power under hood (454 emblems are due to arrive soon). The result is a car that checks all the boxes with regards to modern Camaro performance, just wrapped in one of the best Camaro shapes ever to leave a GM assembly line.

Just ask Carl.

1969 Chevrolet Camaro Rear 6/6

MORE PHOTOS

VIEW FULL GALLERY

COMMENTS

subscribe to the magazine

get digital get print
TO TOP