Super Chevy
Click here to find out more!

2011 SEMA Show - Aftermarket Overload

The top 99 products from the 2011 SEMA Show are here to feed your custom needs.

By , Photography by Courtesy of SEMA

Quick Links and FireStorm CD Ignition

The Quick Disconnect sway-bar end links allow you to easily disconnect the front sway bar on a fifth-gen Camaro for track use without tools or lifting the vehicle. The FireStorm CD Ignition is a new ignition control that will expand capabilities significantly beyond current ignition functions focusing on early- and late-model applications.

Mr. Gasket/Prestolite Performance
216/688-8300
www.mrgasket.com


LS Coil Brackets and Atomic EFI

MSD is making these direct replacements for the stamped-metal stock coil mounts to enhance the LS's appearance, especially when paired with MSD's multiple spark coils. One of the coolest things at the SEMA Show was MSD's Atomic EFI system. MSD touts it as the easiest throttle-body EFI system available. It requires only eight connections and a single fuel line with no PC programming necessary to function.

MSD Ignition
915/857-5200
www.msdignition.com


ProLine Rectangular Control Panel

Take control of your Vintage Air Gen IV 3 Lever with this machined aluminum slide control panel. It features a polished bezel and knobs with a matte Mylar face. It's available in black-anodized finish as well and installs in either a vertical or horizontal position.

Vintage Air Inc.
800/862-6658
www.vintageair.com


Hurricane A/C & Heater System

New from Old Air is the Hurricane In-dash air conditioning, heater, and defrost combo for the '68-69 Chevelle. It mounts to the firewall and offers the choice of either an electronic slide control or integrated switching using original factory controls. Unique modular design provides tri-level cold or warm airflow.

Old Air Products
817/531-2665
www.oldairproducts.com


Digital Battery Charger

Optima took time away from creating batteries to come out with a charger. This microprocessor-controlled charger charges, conditions, and maintains 12V AGM (Optima-style) and flooded batteries. It can recover deeply discharged batteries and extends battery life.

Optima Batteries
888/8OPTIMA
www.optimabatteries.com


Fifth-Gen Headers and Severe-Duty SBC

Procomp Electronics had a lot to show off this year. Two of the best were the fifth-gen Camaro headers and a severe-duty block. The headers features a four-into-one design with merged collectors providing a 15hp gain. The block is a fully machined 350 Chevrolet block with billet main caps. It is line-honed and decked with 9.025 lifter bores that are machined and matched—basically it's ready to assemble.

Procomp Electronics
909/605-1123
www.procompelectronics.com


LS Valve Covers and SBC Dress-Up

LS Valve Covers and SBC Dress-Up Specialty Auto Parts, alias Proform, has got all your dress-up needs covered. Chevy Orange is the rage right now, so Proform released the complete orange and black kit. For the LS owner, the company cast up the Slant-Edge valve covers. It will display the Chevrolet and Bowtie emblems with pride as they burst through a sea of wires and tangle.

Specialty Auto Parts
586/774-2500
www.proformparts.com


Fifth-Gen Subframe Bushings

These polyurethane rear subframe bushings from Prothane Products give the car a precise feel and react to your steering inputs quickly. Additionally, standing-start launches will be more controlled and wheelhop will be drastically reduced.

Prothane Products
714/979-4990
www.prothane.com


Tubular Control Arms and Bolt-In Rear Coilover Kit

QA1 control arms reduce unsprung weight while improving weight distribution in race applications. QA1's arms for GM applications utilize the company's low-friction adjustable ball-joints. The Chevelle bolt-in rear coilover kit is available in single- and double-adjustable configurations, along with multiple spring-rate options.

QA1 Motorsports
800/721-7761
www.qa1.net


Modified Underhood Crossbrace

Real Deal Steel has something for the non-billet crowd. The steel underhood brace for the '57 Chevy is modified to allow use of a center-outlet radiator mounted in front of the core support. This is needed for long water pump and big-block installations.

Real Deal Steel
407/585-1957
www.realdealsteel.com


Fifth-Gen Quarter Molding

Retro USA's '10-11 Camaro Quarter Moldings are a replica of the shark gill moldings on the '69. They are available in chrome and black, all chrome, and paintable finishes.

Retro USA Inc.
877/473-8768
www.retrousa.net


Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
Super Chevy